Brand Name : ShengHui
Model Number : SHMMCW-09
Certification : SGS
Place of Origin : Guangdong, China
MOQ : 1 Roll
Price : USD 200/ Roll
Supply Ability : 200,00 Rolls/Month
Delivery Time : 5-7 days
Packaging Details : 1.52*18m
Face Film : Polymeric Calendered Vinyl Film
Face Film Thickness : 4.8 MIL (120 µm)
Surface Finish : Matte Metallic
Adhesive Type : Clear Removable Acrylic Adhesive
Adhesive Thickness : 30 µm
Release Liner : PET Release Liner/Air-Egress PE-coated Paper Liner
Thickness : 60 µm/140gsm
Max Durability : Up to 5 years
Product Name: Matte Metallic Yellow Car Wrap Film Air Release Swipeable
|1. Face Film||Type:||Polymeric Calendered Vinyl Film||Thickness:||120 µm|
|Surface Finish:||Matte||Color:||Matte Metallic|
|2. Adhesive||Type:||Clear Removable Acrylic Adhesive|
|3. Liner||Type:||Air-Egress PE-coated Paper Liner||Thickness:||140gsm|
|4. Max Durability||Up to 5-7 years|
|5. Product Size||Width||Length|
|Notice: There is a Minimum Order Requirement for Special Product
￭ Vehicle advertising
Advantages of Applying Car Wrap Film:
The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.
Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.
1.Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.
2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.
3.Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.
4.Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.
Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.
Yellow Metallic Matte Car Vinyl Wrap Self Adhesive 140gsm Thick Images