Brand Name : ShengHui
Model Number : SHCHCW-35
Certification : SGS
Place of Origin : Guangdong, China
MOQ : 1 Roll
Price : USD 200/ Roll
Supply Ability : 200,00 Rolls/Month
Delivery Time : 5-7 days
Packaging Details : 1.52*18m
Face Film : Polymeric Calendered Vinyl Film
Face Film Thickness : 4.8 MIL (120 µm)
Surface Finish : Chrome
Adhesive Type : Clear Removable Acrylic Adhesive
Adhesive Thickness : 30 µm
Release Liner : PET Release Liner/Air-Egress PE-coated Paper Liner
Thickness : 60 µm/140gsm
Max Durability : Up to 5 years
Product Name: Air Release Slideable Gold Chrome Car Wrap Film
Product Description:
Product Specfications:
1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
Surface Finish: | Chrome | Color: | Silver Mirror | |
2. Adhesive | Type: | Clear Removable Acrylic Adhesive | ||
Thickness: | 30 µm | Color: | Clear | |
3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
4. Max Durability | Up to 5 years | |||
5. Product Size | Width | Length | ||
(metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) | |
1.27 | 50 | 18 | 20 | |
1.52 | 60 | 23 | 25 | |
Notice: There is a Minimum Order Requirement for Special Product
Size. |
Product Features:
FAQs:
The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.
1.Pull the wrap away from the edges at a steep angle, pulling the
wrap back on itself at 15 to 20 degrees. When the wrap gets hard to
pull, reheat and start pulling again.
2. Use the heat gun to evenly heat the surface of the wrap to about
120 °F (50 °C). This will loosen the adhesive so you can pull it
off. Use a non-contact infrared thermometer to confirm you aren’t
overheating, which can lead to excessive adhesive residue left on
the surface.
3. Use your fingernail or plastic scraper to pull the wrap from the
edges of the entire panel. It’s going to look gnarly, but it’ll all
be gone in a few minutes.
4.Finally, use Turtle Wax Label & Sticker Remover or Bug &
Tar Remover to remove any adhesive residue from the surface of the
panel.
Actually, car wrap can protect your paint because it blocks
damaging ultraviolet light. When you remove it, the original finish
will be intact.
Depending on the quality of the wrap, type of vinyl wrap, care
taken during installing, care for installation, and environmental
factors, car wraps can last from three to ten years.
Advantages of Applying Car Wrap Film:
![]() |
High Gloss Gold Chrome Car Vinyl Wrap Air Release Slideable 140gsm Images |